tombatics
Published © GPL3+

Turning Any R/C Car into a Bluetooth App Controlled Car

This project shows you how to change an ordinary remote control car to a Bluetooth control car with a Wombatics SAM01 Arduino board.

IntermediateFull instructions provided4 hours52
Turning Any R/C Car into a Bluetooth App Controlled Car

Things used in this project

Hardware components

SAM01 - Arduino Nano Compatible Robotics Board
×1
MX1616 - DC Motor Driver Module
×1
Resistor 220 ohm
Resistor 220 ohm
×1
XH-2P Battery Cable
×1

Software apps and online services

Blynk
Blynk

Story

Read more

Schematics

SAM01 - Arduino Nano Compatible Robotics Board

Documents location: https://github.com/wombatics/sam01/blob/master/Documents/

Code

Arduino Code for SAM01 Arduino board to connect with Blynk App

This code runs on SAM01 Arduino board and receive command from Blynk App through BLE. Upload using Arduino IDE. Source code in https://github.com/wombatics/sam01/tree/master/Arduino/examples/Sam_Blynk_RC_Car

Arduino Code for SAM01 Arduino board to connect with Blynk App

This code runs on SAM01 Arduino board and receive command from Blynk App through BLE. Upload using Arduino IDE. Source code in https://github.com/wombatics/sam01/tree/master/Arduino/examples/Sam_Blynk_RC_Car

Credits

tombatics

tombatics

1 project • 0 followers
Wombatics - Arduino for Makers and STEM Education

Comments

Add projectSign up / Login