Jure ŠpehMatic SedejGregor Obreza
Published © GPL3+

ShroomBox - IoT Mushroom Fruiting Chamber with Blynk

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

IntermediateFull instructions provided24 hours501
ShroomBox - IoT Mushroom Fruiting Chamber with Blynk

Things used in this project

Hardware components

Espressif ESP32-DEVKITC-32D
×1
Gas Detection Sensor, Carbon Dioxide, 40000 ppm, 3 %
×1
DS18B20, Digital Temperature Sensor
×1
Soil Moisture Sensor Module, Capacitive, Gravity Series
×1
SHT30
×1
IRLZ34NPBF Power MOSFET, N Channel, 55 V, 27 A, Through Hole
×5
Wire-To-Board Terminal Block, 5.08 mm, 2 Ways, 26 AWG, 12 AWG, 16A
×1
Cable Gland, PG7
Cable Gland, PG7
×5
Cable Gland, PG9
Cable Gland, PG9
×2
EURO connector Male for Panel
×1
JLCPCB Customized PCB
JLCPCB Customized PCB
×1
Heatpad 12V 50W
×2
Axial Fan, 12 V
Axial Fan, 12 V
×1
Ultrasonic humidifier
×1
LED strip 12V 1m
×1
230V to 12V power supply
×1
MP2307 DC/DC step down converter module
×1
SMD1206 resistors, capacitors and other components as described in schematic
×1

Software apps and online services

Blynk
Blynk
PlatformIO IDE
PlatformIO IDE

Hand tools and fabrication machines

Drill / Driver, 20V
Drill / Driver, 20V
Soldering iron (generic)
Soldering iron (generic)
3D Printer (generic)
3D Printer (generic)

Story

Read more

Custom parts and enclosures

3D models

3D models in SolidWorks format for 3D print.

Schematics

ShroomBox PCB Schematics

Code

ShroomBox GitHub repository

Platformio project with source code for firmware code including Blynk connection code.

Credits

Jure Špeh

Jure Špeh

1 project • 2 followers
Developing software and hardware for IoT and IIoT projects | Mobile Development
Matic Sedej

Matic Sedej

0 projects • 1 follower
I’m interested in electronics, programming, ...
Gregor Obreza

Gregor Obreza

0 projects • 1 follower

Comments

Add projectSign up / Login