In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
This tutorial is a follow up to my previous tutorial on making automated driveway gates, including different code and a custom PCB design.
How to make a smart greenhouse using Arduino and Node MCU for IoT
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Garage Door IOT Monitor and Controller, using Blynk App on your cell phone.
A simple device that turns the lights on when the user approaches home.
Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
This health band can assist old people in their daily lives, leaving the family stress free!
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Smart Garden is a plant environmental monitoring system.
Use the Ionic framework to build an app that can control your hardware or hit any REST API.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
A lamp which changes color according to the tweets of people.
A project that displays the temperature and humidity of a room on your mobile in real time.
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
This is a unit to control a central heating system via 433MHz radio signals. Control of heating is via a Blynk app.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.