We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
For now, you can control Servo with Blynk.
How to Read Multiple Analog Values Using One Analog Pin
This Robot cleans floors very efficiently !!:)
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Home Automation NodeMcu ESP8266 | Arduino | Smartphone Controlled
You can easily water your plants using IOT with the Soil moisture sensor
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Human detection Security System Using IOT
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
This is CDVR Robot - "Crowd Deterrent Vigilance Robot" to control Covid-19 situation
I created a raspberry pi remote-controlled car using Blynk.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.