We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.

Make a simplified table trash bin and can.

A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's!

This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.

This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.

A new iteration of my original device called Crawler. It creeps around and avoids things. Enough said. :-)

This is a tutorial to show you how to connect to Blynk using an ESP8266 - 01 as an Arduino Uno wifi shield.

Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.

Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen

Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.

Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.

You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.

Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.

Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.