Here's an easy introduction to controlling a Nema 17 stepper motor with the help of the Adafruit TB6612 breakout board OR A4988 Stepstick.
Learn how to use Blynk app with an ESP8266.
Use the Ionic framework to build an app that can control your hardware or hit any REST API.
Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
Learn how to use Blynk with Node.js on a variety of platforms.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
We often face the problem of water getting spilled out from our overhead water tanks. So, let us make a solution to monitor water level.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
Your search for a big bedside clock has an end.
Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.
At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!
This guide will demonstrate to beginners how to use Arduino 101 BLE (Bluetooth Low Energy) feature to control an LED from an Android mobile.
Use a LattePanda and Blynk to make a simple but cool IoT control unit.
This walks you through the Blynk boar'd's firmware.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Don't let your BBC micro:bit collect dust! Here is how to use it with Blynk and Arduino IDE.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
A tutorial on how to use the most important element of blynk.
Control your LED on Arduino UNO using Blynk App.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Or connect with your social account:
New here? Create an account