We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Controlling a robot via WiFi, using Arduino and Blynk application.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Check in on a loved one instantly and have fun!
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
This project will show you how to adapt a SMARS bot controlled with iPhone accelerometers, Blynk, a Wemos D1 Mini, over WiFi.
You can easily water your plants using IOT with the Soil moisture sensor
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
I created a raspberry pi remote-controlled car using Blynk.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Human detection Security System Using IOT
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
study and observer environment with this rover