If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.

An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.

An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.

Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!

Controlling a robot via WiFi, using Arduino and Blynk application.

Clean your yard from your smartphone or preset a job for AYSE to follow!

Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.

This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.

Check in on a loved one instantly and have fun!

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!

This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.

This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.

Yulee Rover is an Arduino Uno powered robot.

CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.

Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?

MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.

I wanted to make a robot. However, I could only make a foot because my money ran out.