Build an Android or iOS app for your hardware with no coding!
Smart Garden is a plant environmental monitoring system.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Save time by knowing whether the Faculty is in his chamber or not.
Know when your clothes are dry
saving water smartly.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
Create your Blynk mobile app to monitor your garden and activate the irrigation.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
Or connect with your social account:
New here? Create an account