Garage Door IOT Monitor and Controller, using Blynk App on your cell phone.
Hi im new
Temp And Humidity Measurement W/ Node MCU, DHT & Blynk
This Robot cleans floors very efficiently !!:)
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
To assist the doctors to track their patients during COVID-19
Weather station that display temperature, humidity and pressure on your Android phone with Blynk IoT server.
This is CDVR Robot - "Crowd Deterrent Vigilance Robot" to control Covid-19 situation
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
Solar installation with lithium battery packs monitoring.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
This project makes us able to control our home lamp remotely from our Android devices.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
This project can detect both possible and actual landslides, and send an alert to all those who are connected.
A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
This product is designed to monitoring the quality of air continuously for COPD patient.
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
This battery charger monitor uses an OLED display & Blynk to show you its charge current, bus voltage, load voltage & elapsed time.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
Get alerted about your grain bin overflowing- before it happens.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.