Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT
This project is showing you how much we are destroying earth
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
How to make an IOT Weather Reporting System using Arduino and Node MCU
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
This tutorial shows how to build weather station from Magicbit using Arduino which can get details from your smart phone
Weather station that display temperature, humidity and pressure on your Android phone with Blynk IoT server.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
In this project, you can view the temperature and humidity in your room wherever you are.
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
This product is designed to monitoring the quality of air continuously for COPD patient.
A weather station based on ESP8266 +blynk
Anytime you want to visualize a precise place you just clic on the app and see due to this
Drive a 8x32 LED dot matrix module with a particle photon to display real-time weather or messages sent via the Blynk app.
A simple project to display a particular webpage data in blynk app via bluetooth module and using thingspeak platform.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
A first introduction to using Hover Labs Beam.
Check the current conditions: light, temperature, humidity on your smartphone.
A DHT11 connected to Blynk to read data
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!