In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.

This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.

A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.

You can easily water your plants using IOT with the Soil moisture sensor

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

study and observer environment with this rover

A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable

We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.

My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.

Using UIFlow and Blynk to complete the interaction experiment

Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.

You can control your home light or any appliances from anywhere and anyplace

The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.

Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!

This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.

Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.

Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen

Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.

Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.