Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Control an on-board LED.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Make a simplified table trash bin and can.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Too lazy to get off the couch? "Alexa, turn on the lights."
Making a smart garage model from the toy building using XOD and Blynk.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Learn how to use the Blynk app to automate your house.
Check in on a loved one instantly and have fun!
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.