This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.

Here's an easy introduction to controlling a Nema 17 stepper motor with the help of the Adafruit TB6612 breakout board OR A4988 Stepstick.

Learn how to use the Blynk app to automate your house.

Learn how to use Blynk app with an ESP8266.

Check in on a loved one instantly and have fun!

No Blynk libraries for Bluz? No problem!

This is a simple project for those who want to make a relay module using one BC547 transistor.

A home automation project for light use with an ESP8266 and 5V relay.

Cost effective and highly reliable industrial automation solution using the power of Arduino.

A four-legged robot on roller skates.

Monitoring Industries using the power of Internet and automation.

In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.

Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.

Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.

Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.

A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.

A smartphone garage door remote and status sensor using Blynk and Photon.

A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.

Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!

Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.

Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.

Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.

In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!

Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.