An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.

A simple device that turns the lights on when the user approaches home.

A IoT system which helps you control your home lights from anywhere in the world in real time.

This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.

A lamp which changes color according to the tweets of people.

Flashy LED decor lights that respond to your bike's motion.

Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!

In this tutorial we're going to learn how to use Blynk app & Arduino in order to control a lamp; the combination will be through USB serial.

Control your Home Lights using the Twitter platform.

The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.

This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device

Turn your plain light switch into an internet connected luxury item that will wow your friends and family.

Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList

Luminous ball, with clock and thermometer, controlled by Blynk.

I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!

A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.

A smart Christmas tree controlled by your smartphone using Blynk and ESP8266.

This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.

I changed ordinary boring desk lamp into Blynk controlled device :)

You can control your home light or any appliances from anywhere and anyplace

It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.