Monitoring parameters of Greenhouse located at remote location (with no Internet Connectivity), using LoRa IoT
How to make Smart Car Accident & Alcohol Detector Using ESP32 how to Create a Smart Car Accident & Alcohol Detector Using ESP32
In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.
Integrating Blynk to a WiFi MESH network for Lifstyle Property monitoring and control of various mission critical assets.
How to achieve optimum bulk fermentation in sourdough bread with monitoring its pH.
Lock your door from anywhere
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
ESP8266 Smart Home Water Level Monitoring | DIY Enclosure Design | 3D Printing
created a cost-effective Remote Monitoring System using NodeMCU, Blynk API, and Arduino code, resulting in a 30% reduction in downtime
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
How to make an IoT Based Early Flood Detection & Avoidance how to create an IoT Based Early Flood Detection & Avoidance
How to make Smart Door Receptionist with Smart Lock System Using IoT how to create a Smart Lock System Using IoT
This Smart Water Meter has an inductive proximity sensor connected to an ESP32 is programmed in ARDUINO and uses the BLYNK IoT platform.
Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.
How to make a smart waste management system using iot, how to create a smart waste management system
How to make a IoT Based Patient Health Monitoring System How to create a human health monitoring system
How to make a smart Air Quality Monitoring System, How to create a smart Air Quality
Control and Monitor your ESP32 Dev Board with the Blynk IoT Cloud. Guide for Blynk 1.0 (legacy) and Blynk 2.0 API uses
How to make a smart animal health monitoring system How to create a smart animal tracking system
Smart step counter shoe using ESP8266, Infrared Sensor and a LiPo battery.
How to make smart safety and health monitoring for construction workers, How to create a smart safety system
Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
It's smart... It's automatic... it's a humidifier... It's a Charizard!