It is a solution for people who want to grow indoors vegetables, without worrying about How Often & How Much Watering the Houseplants are.

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

How to make a smart greenhouse using Arduino and Node MCU for IoT

Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT

The Plant Observatory of Weather Adaptability for Resilience is a DIY, Low-Cost, climate simulator, to grow food nowadays in future weather.

A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.

This ESP32 based use of automatic watering can help take care of plants.

Smart Garden is a plant environmental monitoring system.

A smart approach in watering plants to effectively utilize rainwater using weather forecast data.

Sometimes I want to start farming, but often because of environmental problems, weather problems, temperature, or pests that make people not

When rat enters the trap, there's no turning back

Automatic irrigation of 3 plants of Pothos, through the use of Wemos (ESP8266).

Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.

Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.

A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.

IoT-based project to control an indoor garden, monitor them remotely, and use the data for future analysis.

A simple 4 channel design/program for monitoring orchid and plant moisture levels.

It is a simple project that helpful for the advanced level of farming and irrigation.

How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

This system will water your plants automatically, monitor the level of the water reservoir and will keep your plants happy on many aspects.

Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.

Stay informed about soil-measurement by using Particle Photon.

This is the next step with an Particle Photon and softAP integration: cucumbers go online.