In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix

In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.

How to make a smart greenhouse using Arduino and Node MCU for IoT

LCD Display and LoT Blynk App of Temperature, Humidity and Smoke Sensors

Make a simplified table trash bin and can.

This tutorial is about making an automated gate for your driveway for $200 with ESP8266, Arduino, and Blynk.

In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.

How To make Simple Home Automation System

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.

Simple and easy build of Arpeture MC Mini at a fraction of cost!

Hii Friends Today I'll Show You How To Make Simple DIY Arc Reactor Using WemosD1 SO LET'S Make It🔥

Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥

A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

This project aimed at designing and fabricating a highly reliable, user-friendly device.

Simple yet effective

Coding is so FUN! you can make a smart parking in your house!

Coding is FUN! You can make your Censor with BLYNK!