It is a solution for people who want to grow indoors vegetables, without worrying about How Often & How Much Watering the Houseplants are.

Automatically feed all excess solar energy, and only excess, into existing electric heaters.

In this project, we will learn about the application of Arduino IoT Cloud with AR D1. Recently the Arduino Community launched their IoT plat

In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.

How to make an IoT-based home monitoring system, how to make home automation

Integrating Blynk to a WiFi MESH network for Lifstyle Property monitoring and control of various mission critical assets.

ESP8266 Smart Home Water Level Monitoring | DIY Enclosure Design | 3D Printing

How to make Smart Door Receptionist with Smart Lock System Using IoT how to create a Smart Lock System Using IoT

This Smart Water Meter has an inductive proximity sensor connected to an ESP32 is programmed in ARDUINO and uses the BLYNK IoT platform.

Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.

How to make a smart greenhouse using Arduino and Node MCU for IoT

Control and Monitor your ESP32 Dev Board with the Blynk IoT Cloud. Guide for Blynk 1.0 (legacy) and Blynk 2.0 API uses

Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.

It's smart... It's automatic... it's a humidifier... It's a Charizard!

This health band can assist old people in their daily lives, leaving the family stress free!

A IoT system which helps you control your home lights from anywhere in the world in real time.

Today security is one of the prime aspect in our society. Securing our home and family is important.

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.

This is a second tutorial for making DIY automated driveway gates for relatively cheap using Arduino, ESP32, Raspberry Pi, and Blynk!

This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!

This tutorial is for how to make a lightning bot / sensor with Wemos D1 Mini (ESP8266), DFRobots' AS3935 and Blynk.

Make a simplified table trash bin and can.

A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.