We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!

Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.

Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.

Automatic cleaning of your yard from a smartphone!

Save time by knowing whether the Faculty is in his chamber or not.

A system to monitor the soil status using Wi-Fi with a remote dashboard based on Blynk.

How to make a CENTRALIZED_AUTOMATION_OF_INDUSTRY_FOR_SAFETY USING IOT

How to make drainage. how to make smart drainage. how to create IOT drainage.

How to make an IOT Weather Reporting System using Arduino and Node MCU

How to make a smart greenhouse using Arduino and Node MCU for IoT

Develop a device which detects the level of fluid in the electrolyte bottle and capable of sending notification to the nurse station.

It's difficult to make communication with ESP-01 module but today I'll show how to do it in the simplest way.

Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT

First step towards Home automation

Life Band monitors the health conditions of elderly up to date and provide immediate medical assistance if necessary. (needtoupdate thecode)

This ESP32 based use of automatic watering can help take care of plants.

Starting from my laziness in opening a garage at home, and wanting to know whether the contents of the garage are empty or not, therefore I

Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.

Home automation is a term used to describe the process of automating certain tasks and devices around the home.

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

A Sci-Fi 3D Printed Winter Soldier Mask With Transparent Display.

Playback messages & white noise (amp & speaker), control Philips WiZ smart lights (via IFTTT), play tunes (via piezo), PIR movement sensor.

Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.