Do you have difficulties keeping your house plants alive? this might help preventing you from over/under waterings your favourite plant.
Build an Android or iOS app for your hardware with no coding!
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Know when your clothes are dry
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Automatic and smart care of plants by proper watering and their monitoring.
Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
Save water, save energy and monitor water consumption with a smart faucet.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
This idea aims to provide a solution to generate early warnings that allow timely reaction to disasters due to floods or avalanches.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
