Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
How to Read Multiple Analog Values Using One Analog Pin
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Controlling a robot via WiFi, using Arduino and Blynk application.
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
Clean your yard from your smartphone or preset a job for AYSE to follow!
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
Check in on a loved one instantly and have fun!