Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Learn how to use Blynk with Node.js on a variety of platforms.
Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
It's difficult to make communication with ESP-01 module but today I'll show how to do it in the simplest way.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Use the Ionic framework to build an app that can control your hardware or hit any REST API.
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Control your home applications using Google Assistant.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
We often face the problem of water getting spilled out from our overhead water tanks. So, let us make a solution to monitor water level.
A tutorial on how to use the most important element of blynk.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
This walks you through the Blynk boar'd's firmware.
Control your home applications using Amazon Alexa.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Control your LED on Arduino UNO using Blynk App.
Learn how to use Blynk app with an ESP8266.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.
It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.
Use a LattePanda and Blynk to make a simple but cool IoT control unit.