Build an Android or iOS app for your hardware with no coding!
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Save time by knowing whether the Faculty is in his chamber or not.
Know when your clothes are dry
saving water smartly.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Create your Blynk mobile app to monitor your garden and activate the irrigation.
How can scientists model and predict the formation of sink holes using IoT?
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
A solution to measure noise level and sound pollution in urban areas.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
The IoT egg tray lets you know how many eggs you have left in the fridge and also shows temperature & humidity of your fridge.
This product is designed to monitoring the quality of air continuously for COPD patient.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.