We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Check in on a loved one instantly and have fun!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Controlling a robot via WiFi, using Arduino and Blynk application.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
This is a project about a robot made for people who feel lonely.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi guys it's me Rohan Barnwal welcome back with another project in this project I demonstrate you how to create notification based door bell
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
Human detection Security System Using IOT
This project will show you how to adapt a SMARS bot controlled with iPhone accelerometers, Blynk, a Wemos D1 Mini, over WiFi.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
A car that can be controlled from anywhere in the world over the internet.
Home-automation system using 8 Node PCB & Blynk 2.0