Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
In this project, you can view the temperature and humidity in your room wherever you are.
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.
Using a BeagleBone Black, you can create a custom smart mirror to keep you up to date and on track in the mornings when getting ready.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
Control an on-board LED.
A few months back, I posted a tutorial on an Arduino-based weather station, in which I displayed the humidity...