Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
HealthEcos - An ecosystem for realtime monitoring of health data and detection of the symptoms related to COVID-19 and medication management
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
To assist the doctors to track their patients during COVID-19
A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.
You can easily water your plants using IOT with the Soil moisture sensor
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
Real-time workstation display of all patients in an intensive care unit. Real-time feedback to doctor's phone and concept of smart ambulance
Using UIFlow and Blynk to complete the interaction experiment
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
You can control your home light or any appliances from anywhere and anyplace
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!