Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
The fundamental understanding and significance of developing an Agrovoltaic monitoring system for smart agriculture.
A simple bee monitoring system that uses sensors and AI vision to facilitate bee care
This idea aims to provide a solution to generate early warnings that allow timely reaction to disasters due to floods or avalanches.
Put back yard water pump on the internet.
You don't open it, it opens itself. You don't check it, it checks itself
self-sufficient with battery operation and multi-wifi support
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!
Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone
We are going to learn how to build a Fire alarm using NodeMCU and Blynk App.
This project is useful for people who forget to water their plants properly.
Sometimes I want to start farming, but often because of environmental problems, weather problems, temperature, or pests that make people not
When rat enters the trap, there's no turning back
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.