Home-automation system using 8 Node PCB & Blynk 2.0

Playback messages & white noise (amp & speaker), control Philips WiZ smart lights (via IFTTT), play tunes (via piezo), PIR movement sensor.

This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!

A simple add-on to a regular door the provides automatic operation based on voice command, smartphone command or presence detection.

Internet and Manual control home-automation system using blynk2.0 and SMT home-automation PCB.

Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone

This Smart Water Meter has an inductive proximity sensor connected to an ESP32 is programmed in ARDUINO and uses the BLYNK IoT platform.

It dispenses coasters remotely to signal to a person they should use a coaster because people never use them even though they should.

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.

Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)

Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.

Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.

Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.

Now get your alerts & updates about home, wherever you are, with an SMS on your mobile! All with a simple NodeMCU project!

Perfect Smart Switches

This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266

An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

A small project designed using Node MCU and Blynk app to enable using the Google Assistant to switch on/off home appliances.

Home automation using NodeMCU and Blynk App

This tutorial is for how to make a lightning bot / sensor with Wemos D1 Mini (ESP8266), DFRobots' AS3935 and Blynk.

It's smart... It's automatic... it's a humidifier... It's a Charizard!