Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona

This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device

Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell

This Preventive measure reduces the spread of infection to a large extent. A Must Watch!

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

You can easily water your plants using IOT with the Soil moisture sensor

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

study and observer environment with this rover

I created a raspberry pi remote-controlled car using Blynk.

Human detection Security System Using IOT

Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?

This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.

MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.

Check in on a loved one instantly and have fun!

Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!

An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.

Controlling a robot via WiFi, using Arduino and Blynk application.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.

5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.