Human detection Security System Using IOT
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
I wanted to make a robot. However, I could only make a foot because my money ran out.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Check in on a loved one instantly and have fun!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Clean your yard from your smartphone or preset a job for AYSE to follow!
Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!
Yulee Rover is an Arduino Uno powered robot.
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Controlling a robot via WiFi, using Arduino and Blynk application.
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.