A DHT11 connected to Blynk to read data
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
Weather station that display temperature, humidity and pressure on your Android phone with Blynk IoT server.
A weather station based on ESP8266 +blynk
Anytime you want to visualize a precise place you just clic on the app and see due to this
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
A simple project to display a particular webpage data in blynk app via bluetooth module and using thingspeak platform.
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
Drive a 8x32 LED dot matrix module with a particle photon to display real-time weather or messages sent via the Blynk app.
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
In this project, you can view the temperature and humidity in your room wherever you are.
This product is designed to monitoring the quality of air continuously for COPD patient.
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Check the current conditions: light, temperature, humidity on your smartphone.
How to make an IOT Weather Reporting System using Arduino and Node MCU
A first introduction to using Hover Labs Beam.
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
This tutorial shows how to build weather station from Magicbit using Arduino which can get details from your smart phone
This project is showing you how much we are destroying earth