Build an Android or iOS app for your hardware with no coding!
Smart Garden is a plant environmental monitoring system.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
How can scientists model and predict the formation of sink holes using IoT?
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Know when your clothes are dry
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Save time by knowing whether the Faculty is in his chamber or not.
saving water smartly.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
