Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.

A complete functional unit for monitoring and controlling the internal environmental conditions of a greenhouse (with code and schematics).

A small device for controlling RGB strips over the internet. The system is based on the NodeMCU using Blynk for remote control.

Garage Door IOT Monitor and Controller, using Blynk App on your cell phone. Also OTA updates and MQTT to Home Assistant.

The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.

Smart Garden is a plant environmental monitoring system.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

Hi im new

This Robot cleans floors very efficiently !!:)

Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.

Save time by knowing whether the Faculty is in his chamber or not.

To assist the doctors to track their patients during COVID-19

A simple 4 channel design/program for monitoring orchid and plant moisture levels.

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.

50 people and 6 robots sumo at IoT meetup.

Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.

A lamp which changes color according to the tweets of people.

Self-stabilizing spoon for Parkinson's sufferers who have difficulty eating on their own because of serious tremors.

Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.

How to (and not to) build your own home automation system.

This project makes us able to control our home lamp remotely from our Android devices.

This project can detect both possible and actual landslides, and send an alert to all those who are connected.

This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.