Monitoring parameters of Greenhouse located at remote location (with no Internet Connectivity), using LoRa IoT
In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Control and Monitor your ESP32 Dev Board with the Blynk IoT Cloud. Guide for Blynk 1.0 (legacy) and Blynk 2.0 API uses
Smart step counter shoe using ESP8266, Infrared Sensor and a LiPo battery.
Harsh Weather Monitoring Using Arduino MKR 1300 and Blynk
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
The fundamental understanding and significance of developing an Agrovoltaic monitoring system for smart agriculture.
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
Robotic Arm Smart Controller System with IoT
Use your phone to control a servo via WiFi!
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
First step towards Home automation
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.
Manually & Remotely Controlled home-automation system using blynk 2.0 and SMT Smart home-automation pcb.
Home-automation system using 8 Node PCB & Blynk 2.0
This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.
Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
We are going to learn how to build a Fire alarm using NodeMCU and Blynk App.