How to connect the TTP223 touch sensor with ESP32 to control relays. explained the circuit and source code in detail.
This project shows how to control the hydroponic system as automation and how to monitor the desired data through applications.
Do you have difficulties keeping your house plants alive? this might help preventing you from over/under waterings your favourite plant.
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
A simple bee monitoring system that uses sensors and AI vision to facilitate bee care
The fundamental understanding and significance of developing an Agrovoltaic monitoring system for smart agriculture.
This idea aims to provide a solution to generate early warnings that allow timely reaction to disasters due to floods or avalanches.
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone
We are going to learn how to build a Fire alarm using NodeMCU and Blynk App.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Simple yet effective
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Save water, save energy and monitor water consumption with a smart faucet.