How to connect the TTP223 touch sensor with ESP32 to control relays. explained the circuit and source code in detail.
This project shows how to control the hydroponic system as automation and how to monitor the desired data through applications.
Do you have difficulties keeping your house plants alive? this might help preventing you from over/under waterings your favourite plant.
self-sufficient with battery operation and multi-wifi support
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Save time by knowing whether the Faculty is in his chamber or not.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
Put back yard water pump on the internet.
A simple bee monitoring system that uses sensors and AI vision to facilitate bee care
The fundamental understanding and significance of developing an Agrovoltaic monitoring system for smart agriculture.
This idea aims to provide a solution to generate early warnings that allow timely reaction to disasters due to floods or avalanches.
You don't open it, it opens itself. You don't check it, it checks itself
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
Smart Garden is a plant environmental monitoring system.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone
We are going to learn how to build a Fire alarm using NodeMCU and Blynk App.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
When rat enters the trap, there's no turning back
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules