In this project, you can view the temperature and humidity in your room wherever you are.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
This health band can assist old people in their daily lives, leaving the family stress free!
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Too lazy to get off the couch? "Alexa, turn on the lights."
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
Turn a light on/off using a relay, Blynk, and an IR Break Beam.