This health band can assist old people in their daily lives, leaving the family stress free!
Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
Turn your plain light switch into an internet connected luxury item that will wow your friends and family.
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
Save water, save energy and monitor water consumption with a smart faucet.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Ever wanted your whole room to be lit in sync with the music? Or to be able to control it with your voice? Then this might be for you!
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
Too lazy to get off the couch? "Alexa, turn on the lights."
Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.
Luminous ball, with clock and thermometer, controlled by Blynk.
Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.
I bought a GE smart outlet because it was on sale @Lowes really cheap. Well their app stinks and its not HomeKit compatible. I fixed that!
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
How to make a smart greenhouse using Arduino and Node MCU for IoT
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.