Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Know when your clothes are dry
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
A solution to measure noise level and sound pollution in urban areas.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Save water, save energy and monitor water consumption with a smart faucet.
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
Monitor the surrounding dust and large particle (>0.5µm) for long time using Blynk IOT and plot the data for further research.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
Automatic and smart care of plants by proper watering and their monitoring.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
How to build a smart monitoring system (temperature, soil moisture, light level, humidity and air pressure sensors) for your plants.
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
This project shows how to control the hydroponic system as automation and how to monitor the desired data through applications.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.