To assist the doctors to track their patients during COVID-19
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
This project makes us able to control our home lamp remotely from our Android devices.
This project can detect both possible and actual landslides, and send an alert to all those who are connected.
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
This battery charger monitor uses an OLED display & Blynk to show you its charge current, bus voltage, load voltage & elapsed time.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
Get alerted about your grain bin overflowing- before it happens.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
A monitoring system that records temperature and motion of a baby while sleeping. Notifications sent to phone and secondary photon.
On-board data acquisition for mountain bike air suspension pressures.
Every backyard needs that little something special. I've created a water fountain that reacts to music and can be controlled wirelessly.
This turns on a bathroom fan automatically when its humid.
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
Smart Garden is a plant environmental monitoring system.
This project creates a way to monitor water usage, to reduce water costs.
Self-stabilizing spoon for Parkinson's sufferers who have difficulty eating on their own because of serious tremors.
Particle and Blynk to wirelessly monitor a 4,000 gallon water distribution system.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.