IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.

Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.

IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere

Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!

Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!

In this project, you can view the temperature and humidity in your room wherever you are.

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.

A solution to measure noise level and sound pollution in urban areas.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.

A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!

A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!

Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?

The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!

Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.

Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.

Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !

Smart Garden is a plant environmental monitoring system.

A simple 4 channel design/program for monitoring orchid and plant moisture levels.

Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.