Home Assistant to control switches and monitor room and outdoor condition using Blynk and Google Assistant.

Put back yard water pump on the internet.

In this project, we will learn about the application of Arduino IoT Cloud with AR D1. Recently the Arduino Community launched their IoT plat

You don't open it, it opens itself. You don't check it, it checks itself

Robotic Arm Smart Controller System with IoT

Use your phone to control a servo via WiFi!

Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.

Manually & Remotely Controlled home-automation system using blynk 2.0 and SMT Smart home-automation pcb.

Home-automation system using 8 Node PCB & Blynk 2.0

This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!

Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone

It dispenses coasters remotely to signal to a person they should use a coaster because people never use them even though they should.

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.

Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)

Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.

Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.

Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.

Now get your alerts & updates about home, wherever you are, with an SMS on your mobile! All with a simple NodeMCU project!

This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266

An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!