A 30$ smart vest exclusively for menopausal women.
Home-automation system using 8 Node PCB & Blynk 2.0
This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!
Now get your alerts & updates about home, wherever you are, with an SMS on your mobile! All with a simple NodeMCU project!
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
Control the position of a microphone stand remotely through Blynk.
Controlling a robot vehicle movements using android phone sensors and Blynk app.
This Robot cleans floors very efficiently !!:)
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
This project will show you how to adapt a SMARS bot controlled with iPhone accelerometers, Blynk, a Wemos D1 Mini, over WiFi.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Clean your yard from your smartphone or preset a job for AYSE to follow!
Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!
Controlling a robot via WiFi, using Arduino and Blynk application.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.