This tutorial is a follow up to my previous tutorial on making automated driveway gates, including different code and a custom PCB design.
This tutorial is about making an automated gate for your driveway for (relatively) cheap with ESP8266, Arduino, and Blynk.
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
Garage Door IOT Monitor and Controller, using Blynk App on your cell phone.
GrumpyHedgehog allows you to communicate with signs and movements to send keyboard commands, turn lights on/off, count people in a room...
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
Simple and easy build of Arpeture MC Mini at a fraction of cost!
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
This project aimed at designing and fabricating a highly reliable, user-friendly device.
Simple yet effective
This health band can assist old people in their daily lives, leaving the family stress free!
A project that combats anxiety, depression and uplifts one's day one compliment at a time.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
It is a simple project that helpful for the advanced level of farming and irrigation.
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
In this project, you can view the temperature and humidity in your room wherever you are.