This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266

Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.

This health band can assist old people in their daily lives, leaving the family stress free!

Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.

Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

Turn your plain light switch into an internet connected luxury item that will wow your friends and family.

In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.

Ever wanted your whole room to be lit in sync with the music? Or to be able to control it with your voice? Then this might be for you!

Too lazy to get off the couch? "Alexa, turn on the lights."

Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.

Luminous ball, with clock and thermometer, controlled by Blynk.

Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.

In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.

LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.

An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa

The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.

How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.

The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.

Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.

Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

A lock which allows remote locking and un-locking. An user does not need to walk to the door to open or lock a door.