5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.

This Robot cleans floors very efficiently !!:)

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

Controlling a robot via WiFi, using Arduino and Blynk application.

Clean your yard from your smartphone or preset a job for AYSE to follow!

Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.

This project will show you how to adapt a SMARS bot controlled with iPhone accelerometers, Blynk, a Wemos D1 Mini, over WiFi.

Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

study and observer environment with this rover

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!

Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.

This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.

Now get your alerts & updates about home, wherever you are, with an SMS on your mobile! All with a simple NodeMCU project!

Controlling a robot vehicle movements using android phone sensors and Blynk app.

Control the position of a microphone stand remotely through Blynk.

A 30$ smart vest exclusively for menopausal women.

The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.

Home-automation system using 8 Node PCB & Blynk 2.0

This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!