Home Assistant to control switches and monitor room and outdoor condition using Blynk and Google Assistant.
You don't open it, it opens itself. You don't check it, it checks itself
self-sufficient with battery operation and multi-wifi support
When rat enters the trap, there's no turning back
In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.
Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.
Stopping my humidifier from working by drowning it via servo when it is no longer dark or when I want.
Simple project for motitoring internal - external home enviromental conditions, motion, fire detection and controling 4 appliences with app
A complete functional unit for monitoring and controlling the internal environmental conditions of a greenhouse (with code and schematics).
A small device for controlling RGB strips over the internet. The system is based on the NodeMCU using Blynk for remote control.
Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.
Hi im new
This Robot cleans floors very efficiently !!:)
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
To assist the doctors to track their patients during COVID-19
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
This project makes us able to control our home lamp remotely from our Android devices.
This project can detect both possible and actual landslides, and send an alert to all those who are connected.
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
This battery charger monitor uses an OLED display & Blynk to show you its charge current, bus voltage, load voltage & elapsed time.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
Get alerted about your grain bin overflowing- before it happens.