Smart Garden is a plant environmental monitoring system.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
saving water smartly.
Know when your clothes are dry
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Save time by knowing whether the Faculty is in his chamber or not.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
A solution to measure noise level and sound pollution in urban areas.
The IoT egg tray lets you know how many eggs you have left in the fridge and also shows temperature & humidity of your fridge.
In this project, you can view the temperature and humidity in your room wherever you are.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.