Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
This health band can assist old people in their daily lives, leaving the family stress free!
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Ever wanted your whole room to be lit in sync with the music? Or to be able to control it with your voice? Then this might be for you!
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
Here, I am explaining you How to Control your lights, fans or other things using Mobile Phone over Bluetooth. Come Let's See
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.
Turn your plain light switch into an internet connected luxury item that will wow your friends and family.
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
Simple yet effective